When you have your phone with you while indulging in regular activities such as cooking, using the washroom, playing with your kids, running errands, etc., there is always a risk. Sometimes, luck isn’t quite in the mood to favor you, and you might just drop your phone into a bucket full of water or even a swimming pool. This article includes a detailed guide on How To Get Water Out Of A Charging Port In an iPhone.
It is crucial to dry your charging port thoroughly “Cool” before using it if you find that water inside of it. You need to think about things like what happens next if the phone’s charging port becomes wet and how you can dry it. There are several ways in which you can get water out of a charging port in an iPhone.
Easy-to-follow Guide To Get Water Out Of A Charging Port In iPhone
- First, unplug your iPhone’s wires and accessories, such as your wired earphones, headphones, or charger. Don’t plug them back in until your iPhone is completely dry.
- Gently tap your iPhone on your hand while the charging port is facing down to drain any extra liquid. Put your iPhone in a dry, well-ventilated place devoid of moisture.
- Try charging your device using the cable or connector after at least 30 minutes have passed.
- There may still be water in your charging port or between the pins of your charging cable if you continue to receive alerts from your phone.
- Even after following the above steps, if your charging port does not dry up. Then you must take your iPhone to its service center and not try experiments alone.
FAQs On Drying Charging Port
A phone cannot withstand the heat produced by a hair dryer. Blow air toward the back of the phone while the blow drier is set to the “Cool” setting. If your hair dryer is not equipped with this option, do not use it because anything greater than that could result in long-term harm.
Although rice is an absorbing medium, it can’t completely remove the moisture trapped inside your phone. Thus, it can only be used as a temporary solution. On numerous websites, it is advised to place wet devices in a heap of uncooked rice to draw the water out. But that doesn’t work and can contaminate the phone with flour and dust.
Yes, you must first get rid of the moisture. You can do this by taking a tiny piece of gentle cotton fabric to perform this. Now, with the help of the cloth, clean the charging port inwards, attempting to gently clean and get rid of excessive water. After that, you can let your phone dry naturally for up to 30 minutes or longer.
The minimum period to leave your phone to dry is 24 hours or even 48 hours for maximum results.
When moisture or liquid enters the Lightning connector, a liquid-detection message that reads “Liquid Detected in Lightning Connector” is flashed on your iPhone’s screen as a warning. Users will be informed of the liquid found inside the lightning connector in the first message. It will advise consumers to unplug the charging cable and let it air dry for several hours as a precautionary step. Not accessible for iPhone charging will be the message displayed on the screen.
You may also like to read How To Turn Off Read Receipts On Instagram?