If your iPhone ever ends up in the water, the camera lens will be the first thing to go. There is still this one problem that the tech pros haven’t been able to solve, no matter how popular Apple’s products are. If water enters the camera, it won’t work. Because of this, if your iPhone was dropped into water, it’s highly likely that more than just the camera was damaged. In that case, please take the gadget to a local repair shop for an inspection as soon as possible.
What are the Steps To Get Water Out Of iPhone Camera?
Take these preventive steps immediately.
Step 1: Remove the battery
You must immediately remove the battery to disable it. You probably want to make sure the phone is functioning properly, but try to resist the desire for now. It’s possible that powering it on will cause the circuits to short out.
Don’t try to fix your phone yourself if you don’t know how to disassemble it. Reassemble it with the lens facing upward and set it on a flat surface. If you can get your phone to face the direction where the sun is at its brightest, that will assist. Nonetheless, you must caution against exposing it to the sun. Just let it sit like this for a while and see how it does in a few hours.
Step 2: Put it in rice
Strange as it may sound, it really does work! Putting your iPhone in a bowl of rice is like administering first aid to your device if you’ve recently realized there’s moisture in the camera (or elsewhere).
Take a bag of raw rice (or pour some quantity into a plastic container). Place your phone inside, and bury it in the rice so that it can’t be retrieved. Let it sit for a day and see if anything has changed. The rice will absorb excess moisture, drying out your iPhone’s camera lens and other afflicted components. Leave it for another 24 hours if the moisture is still there after the first. If things aren’t looking better, it could be time to move on to the next phase.
Step 3: Take your iPhone to a Service Center
When you notice moisture in the camera lens, you might be tempted to just take it to a repair shop for servicing. Take it to a reliable repair shop, though, so you know you’ll get expert help. While stopping by an Apple Store is recommended, keep in mind that the staff there will likely want to upsell you on the newest iPhone model. But a professional repair service should be able to dry out your iPhone’s camera lens and have you back to snapping professional-quality photographs in no time.
Step 4: Use a microfiber cloth to wipe down
Moisture on the inside of the lens can be mistaken for a fogged lens. Water is typically only found on the surface rather than being confined inside. This is excellent news, as the outside of a camera is more easily maintained.
The lens on the back and the one on the front of your iPhone may be cleaned using a microfiber cloth. Make sure the surface is clean of any dirt or debris. After that, make sure the camera can capture a good picture. If the fuzz can still be felt, the camera has been compromised by moisture. A new approach is required in this case.
FAQs On How To Get Water Out Of iPhone Camera
Your iPhone’s camera might have become blurry overnight for a few different reasons. The lens of the camera may be dusty and require cleaning. An additional option is that the lens of the camera is misty and has to be dried. The iPhone’s camera lens could also be damp, in which case a hair dryer would be the best tool for the job.
Submerging an iPhone for an extended period of time increases the likelihood of water damage, although it is possible. Water can do serious damage to a mobile device; therefore, it’s important to power down and dry it as soon as possible if it becomes wet. A vacuum cleaner can be used to remove fluids from the headphone jack or charging port. The next step is to take the phone to a repair shop if it still doesn’t work.
The lens of the camera may be dusty and require cleaning. It’s also possible that the lens is broken, which would explain the issue. If the issues persist despite these adjustments, it may be the sensor or some other part of the camera assembly. In any case, if the iPhone has to be diagnosed or repaired, it’s better to do so at an Apple Store or other official service provider.
After your iPhone has been submerged in water, it is best to let it dry for at least 24 hours before using it again, as advised by Apple. iPhones with bloated batteries take longer to dry out.
Condensation on the lens of your rearview camera is an awful sight. Luckily, there are a few options for drying out a wet rear-view camera lens. The first step in drying out your backup camera’s lens is to microwave a dry, non-permanent desiccant. If you want to preserve your camera in working order, you might want to skip the step where you microwave the rice before it’s been cooked.
Read another article on How To See Through Clothes With iPhone Camera?